Laser Cutting
A laser cutting machine cuts metal with a focused fiber-laser beam guided by CNC — fast, accurate cuts with a narrow kerf and little heat distortion. Our line covers flat sheet and plate, tube and profile, and combined tube-and-sheet machines.
The Range
Machines in Our Cutting Line
Three machine families — flat sheet and plate, tube and profile, or both on one bed. Pick by what you cut and how you load it.
Sheet metal laser cutting machine
Exchange-table machines for flat sheet and plate, from 3 kW entry frames up to a 30 kW flagship, plus small-format precision models for fine parts.
- Power range3–30 kW
- Work areaup to 6.0 × 2.0 m
- Carbon steel≤ 55 mm
- Positioning±0.03 mm/m
Tube laser cutting machine
Chuck-fed machines for round, square, angle and channel profile, in two clamping sizes plus a bevel-cutting configuration.
- Power range1.5–6 kW
- Tube diameterΦ20–240 mm
- Bar length≤ 6.5 m
- Offcut≤ 30 mm
Tube and sheet laser cutting machine
One bed that handles flat sheet and tube in turn, so mixed jobs stay on a single machine instead of two.
- Power range3–6 kW
- Sheet sizeto 2000 × 6000 mm
- Tube diameterΦ20–245 mm
- Mode changeNo tooling change
What It Is
What Is a Laser Cutting Machine?
A fiber laser melts a narrow line of metal while assist gas blows it clear, and CNC drives the head along the part path.
Not Sure Which Fits?
Tell us your material, thickness, profile and volume — we’ll recommend the right machine and power.
- Machine and power recommendation
- Full specifications on request
- Quotation support
Specifications
Key Specifications & Performance
The signature capability of each family — and the shared fiber-laser platform they all run on.
3–30 kW · carbon steel to 55 mm, stainless to 45 mm · work area to 6.0 × 2.0 m
1.5–6 kW · round, square, angle and channel · bar length ≤6.5 m · offcut ≤30 mm · bevel configuration available
3–6 kW · sheet to 2000 × 6000 mm and tube Φ20–245 mm on one machine, no tooling change
All three families run international-brand fiber sources with Raytools auto-focus cutting heads, linear guides from Hiwin or Kotec and Hanli / S&A chillers. Traverse speeds run 60–100 m/min depending on model; thickness figures are maximum single-pass and depend on material and assist gas.
Applications
Applications & Use Cases
Across materials and formats — flat plate, tube and structural profile:
Carbon steel
Stainless steel
Thick plate
Tube & profile
Angle & structural
AluminumWhy Topstar
Maker-Backed, Shipped Worldwide
Maker-backed
Factory-direct pricing, sourced straight from the makers we partner with.
CE coverage
CE coverage across the line; certificates available on request.
Worldwide export
Serving the Middle East, South America, Europe, West Africa and Southeast Asia.
Destination compliance
SASO/SABER, GCC and UKCA addressed per market.
Selection Guide
Comparison & Selection Guide
| If you need… | Go to |
|---|---|
| Flat sheet and plate | Sheet metal laser cutting machine |
| Round, square and profile tube | Tube laser cutting machine |
| Both sheet and tube on one machine | Tube and sheet laser cutting machine |
New to laser cutting? Start with what is laser cutting or compare cutting methods. Buying: check laser cutting machine price or see distributor options.
Get Started
Get a Quote on a Laser Cutting Machine
Tell us your material, thickness, profile and volume and we’ll recommend the right machine and power.