Factory-direct fiber cutters make fast, clean cuts in carbon steel — from thin sheet up to 55 mm plate at high power — with oxygen assist for thick sections and minimal edge finishing.
Carbon Steel Cutting Capacity
| Laser power | Carbon steel (max single-pass) |
|---|---|
| 3000 W | up to 18 mm |
| 6000 W | up to 27 mm |
| 30 kW | up to 55 mm |
Maximum single-pass, material-dependent; continuous-duty figures available on request. Oxygen assist is typical for thicker carbon steel; nitrogen or air for thin, clean cuts. Full range on power options.
How to Cut Carbon Steel
- Import and nest the parts.
- Select power and oxygen (thick) or nitrogen/air (thin).
- Set the matching process parameter from the library.
- Pierce, confirm focus, and cut.
- Inspect the edge; adjust as needed.
Applications & Use Cases
Structural parts, brackets and frames, plate fabrication, machinery components and general carbon-steel subcontract cutting.
CE & Compliance
CE-marked; CE, FDA and SGS documentation available on request.
Choosing Power for Carbon Steel
Pick power by your thickest plate and speed needs; thicker sections need higher power for single-pass cuts. Tell us your range for a recommendation.
Request a Quote · Compare Power Options
1-year warranty; installation, training & after-sales support available.