Factory-direct 1000W and 1500W handheld laser welders, built in-house and available in water-cooled and air-cooled configurations. These mid-power machines cover most thin-to-medium fabrication: stainless steel, carbon steel, galvanized sheet, aluminum and brass — with a 0.5 kg fifth-generation gun and simple touch-screen control.
Key Specifications & Performance
| Specification | 1500W · Water-cooled | Air-cooled (up to 1500W) |
|---|---|---|
| Laser power | 1500 W | 800 / 1000 / 1500 W |
| Cooling | Water-cooled (continuous duty) | Air-cooled (portable) |
| Operating temperature | 0–40 °C | −30 to 60 °C |
| Dimensions (W×D×H) | 700×300×508 mm | 550×270×540 mm |
| Net weight | 50 kg | 38 kg |
| Welding gun | 0.5 kg, 5th-gen rotary head | 0.5 kg, 5th-gen rotary head |
| Operating mode | Continuous / Pulse | Continuous / Pulse |
| Beam wobble | 0–5 mm | 0–5 mm |
| Power supply | 220 V AC | 220 V AC |
| Wire feeding | 4-wheel stepper-motor feeder | 4-wheel stepper-motor feeder |
| Laser source | International-brand fiber laser source options available | International-brand fiber laser source options available |
| Shielding gas | Nitrogen / Argon / Air | Nitrogen / Argon / Air |
| Max single-pass penetration — stainless / carbon / galvanized | 3 mm | up to 6.5 mm (at 1500W) |
| Max single-pass penetration — aluminum / brass | 3 mm / 2 mm | up to 5.5 mm / 4.5 mm (at 1500W) |
| Certification | CE coverage — available on request | CE coverage — available on request |
Penetration values are max single-pass and material-dependent; continuous-duty figures are available on request. The water-cooled configuration is rated for sustained continuous operation, while the air-cooled configuration prioritizes portability and a wider ambient temperature range — so their published figures reflect different duty profiles rather than a like-for-like maximum.
Applications & Use Cases
1000W–1500W handheld welders are the everyday workhorses for sheet-metal and light structural work: stainless kitchenware and furniture, cabinets and enclosures, doors, windows and railings, signage, automotive trim, and general thin-to-medium gauge assembly. The air-cooled option adds true site portability where a water chiller isn’t practical.
Certifications & CE Compliance
These configurations carry CE coverage; conformity certificates are available on request. Destination requirements beyond CE (SASO/SABER, GCC, UKCA, etc.) are handled per market — ask us for the scope that applies to your country. No certificate images are displayed online.
Comparison & Selection Guide
- Choose water-cooled for sustained, continuous production runs and stable heat management over long shifts.
- Choose air-cooled for portability, outdoor or remote work, and a wide ambient range (−30 to 60 °C) with no chiller to maintain.
- Power vs thickness: higher power increases weldable thickness and speed; for thicker material or heavier duty cycles, step up to 2000W–3000W.
Models & Configurations
- 1500W water-cooled — standard continuous-duty handheld
- 1500W air-cooled — portable, no chiller
- 1000W air-cooled — lighter-duty portable option
All configurations use the 0.5 kg fifth-generation rotary-lens gun, 4-wheel stepper wire feeding, gas-pressure monitoring, and support continuous or pulsed welding. International-brand fiber laser source options are available. Contact us for the configuration and lead time that fit your market.
1-year warranty; installation, training & after-sales support available.