Using a handheld laser welder is straightforward — most operators learn the basics in about 30 minutes.
How to Use It (steps)
- Set up: connect power, gas and (if needed) the wire feeder.
- Wear laser safety glasses; check gas pressure.
- Select power, wobble and mode (continuous/pulse) for your material.
- Position the gun and keep a steady distance.
- Press the trigger and move along the joint at a steady speed.
- Inspect the seam; adjust settings as needed.
Key Specifications & Performance (settings that matter)
Power to thickness; wobble for seam width; pulse for thin/precision; shielding gas (N₂/Argon) for clean welds.
Overview — Safety First
Always use eye protection, ensure ventilation, and never aim the beam at people. Gas-pressure monitoring stops output if pressure is low.