Overview
Leather is a CO2 favourite — the beam darkens or cuts it cleanly for logos, patterns and trims with no ink and no contact.
Why CO2 Works on Leather
At 10.6 µm the beam marks a clean tonal contrast on genuine and synthetic leather, and cuts patterns and edges without fraying. Speed and power set how light or deep the mark runs.
Built to Last
The mark is in the surface itself, so it won’t smear, peel or wash off, and it holds up to wear and handling.
Specs That Matter
CO2 10.6 µm, 30W–40W, fields from 100×100 mm, marking speed to 10,000 mm/s — matched to the leather and effect you need.
How to Mark Leather
- Fixture the piece and set the focus to the surface.
- Import the mark or pattern and set power and speed.
- Run a sample, check contrast and edges, then save the recipe.
- Set repeat positioning and start the batch.
- Inspect and log first-article approval.
Applications
Bags and wallets, footwear and belts, fashion accessories, car-interior leather, branded patterns and trims.
CE Compliance
CE-marked, with conformity documentation available on request. We never claim SASO, SABER, GCC or UKCA we do not hold.
Getting It Right Before You Buy
Send us a leather sample. We’ll mark and cut it on the CO2 build, show you the result, then quote against it.
Request a Quote · Download the Spec Sheet
Explore: Non-Metal Marking. Related: CO2 Marking.
1-year warranty; installation, training & after-sales support available.