Overview
Wood is classic CO2 territory — the beam darkens or engraves the grain for a warm, permanent mark that needs no ink.
Why CO2 Works on Wood
At 10.6 µm the beam is absorbed by wood, burning a brown contrast or engraving depth depending on power and passes. Bamboo, plywood, MDF and cork all respond well, with the result set by speed and power.
Built to Last
The mark is burned into the surface itself, so it won’t smear, peel or wash off, and it holds up to handling and time.
Specs That Matter
CO2 10.6 µm, 30W–40W across the range, fields from 100×100 mm, marking speed to 10,000 mm/s — matched to the wood and depth you need.
How to Mark Wood
- Fixture the part and set the focus to the surface.
- Import the mark and set power and speed for the wood.
- Run a sample, check contrast and depth, then save the recipe.
- Set repeat positioning and start the batch.
- Inspect and log first-article approval.
Applications
Signs and plaques, gifts and awards, furniture and bamboo products, crafts, packaging and wooden boxes.
CE Compliance
CE-marked, with conformity documentation available on request. We never claim SASO, SABER, GCC or UKCA we do not hold.
Getting It Right Before You Buy
Send us a wood sample. We’ll mark it on the CO2 build, show you the contrast, then quote against it.
Request a Quote · Download the Spec Sheet
Explore: Non-Metal Marking. Related: CO2 Marking.
1-year warranty; installation, training & after-sales support available.